High pollution location
The Home Quality Mark One, Technical Manual SD239, England, Scotland & Wales, published by BRE in 2018 suggests that:
|
Any developments where any portion of the site is within a local authority air quality management area (AQMA) are automatically considered to be high pollution locations. For developments that are wholly outside of an AQMA, the following levels define high pollution locations: NOx= >15μg/m³ averaged over a year. PM10 = >10μg/m³ averaged over a year. Where the ambient emission level for either pollutant exceeds the high threshold, the development is considered to be in a high pollution area. |
A low pollution location is any location that does not meet the definition of a high pollution location.
[edit] Related articles on Designing Buildings Wiki
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Government approach could undermine delivery and regeneration.
World's first mass timber data centre.
The overlooked environmental aspect of data centre development.
Introduction to radon awareness
New technical information sheet published by CIOB.
Updated supplier guide can help electrical contractors engage with NHP.
CIAT confirm the winners of the 2026 architectural technology awards.
Government launches a one stop shop for flood preparedness.
Sir Edwin Lutyens: Britain's greatest architect? Book review.
CIOB publishes free template to help assess and manage risks.
ECA's reflections on Party Conference season
Burnham wants to be confident of winning before asking for a fresh mandate.
New Chief Construction and Scientific Adviser
Sergio Cavalaro, Professor of Infrastructure Systems at Loughborough University.
Building safety levy for England
CIAT publish estimator tool for members.
Water sector faces a growing crisis that could slow the delivery of vital infrastructure.